Diasen Vapostop

PHP8,060.00
Tax included

One-component water based primer formulated with modified-silanepolymers and designed  for  concrete supports. Created to increase the adhesion degree waterproofing and acrylic coatings, the  product creates a vapour barrier and avoids the development of blistering phenomenon and  detachments caused by moisture. It can be applied even on moist supports, it is water resistant, it has excellent anti-degradation properties of concrete surfaces and it stops the carbonation phenomenon as well

Quantity

Add to wishlist

help_outlineAsk about product
Diasen Vapostop

Diasen Vapostop

 

APPLICATION FIELDS
The product is created to increase the adhesion degree of waterproofing products and acrylic coatings on concrete supports   (plane or sloped coverings, terraces, balconies, eaves, flashings, foundation walls and vertical walls).
It can be applied even on moist supports; it is also able to seal the porosity of the surface by protecting the waterproofing  from blistering  phenomenon and detachments caused by moisture. Vapostop  also  encapsulates dust and ensures adhesion to dusty substrates.

BENEFITS
• Excellent adhesion on concrete supports.
• Applicable even on moist surfaces.
• Suitable for the adhesion improvement of waterproofing and acrylic coatings.
• It protects the concrete from carbonation phenomenon. 
• Water resistant.
• It protects from blistering and detachment caused by dust or moisture.
• Ready to use, easy and quick to apply.

PREPARATION OF THE SUPPORT
The support must be completely hardened and resistant enough. The surface must be thoroughly clean,without oils, greases, debris or detaching parts or other materials that may compromise the product adhesion. It is important that the support is as regular and as workable as possible. If the support is crumbly in its entirety, totally scrape it until obtaining a good support  and restore lesions or damaged parts with suitable mortar.  

icon-keys.jpg

Technical Data
Features Unit
Yield 0.10-0.15 kg/m²
Aspect milky -
Colour clear -
Waiting time between 1st and 2nd coat
(T=+23°C/+73.4°F; R.H. 50%)
1 hours
Application temperature +5 / +35
+41/ +95
°C
°F
Drying time (T= +23°C/+73.4°F; R.H. 50%) 4 hours
Storage 12 months
Packaging 1 and 5 kg plastic bag kg

19024-00002

7 other products in the same category: