APPLICATION FIELDS
This product is studied to waterproof flat and sloped concrete coverings, terraces, balconies, waterspouts, flashings, eaves, foundation walls, fiber cement panel, bathrooms, shower stalls, kitchens and wet areas. Acriflex Rapido is also suitable to waterproof or restore bituminous membranes in combination withSBS-Bond (see technical data sheet).
The product can be applied on existing floor or metal surfaces in combination with Grip Primer (see technical data sheet).
Acriflex Rapido is also suitable for asbestos encapsulation, in particular:
• type A – exposed to the exterior;
• type B – exposed to the interior;
• type C – not exposed.
BENEFITS
• Applicable at temperature up to +1°C (+33.8°F) and relative humidity up to 98%.
• Quick film formation after 20 minutes, even in conditions of low temperature and high humidity.
• Waterproofs with low thickness.
• Flexible at low temperatures.
• Provide a joint less and uniform coat, adaptive to complex geometrical shapes of the support.
• UV-rays resistant, resistant to weather conditions, industrial and marine environments.
• Good consolidation and asbestos’ fibres fixationproperties.
• Possibility to continue indoors’ activities during the whole remediation process.
• Solvent free product.
• Ready to use, easy and quick to apply.
PREPARATION OF SUPPORT
The substrate must be completely hardened and resistant enough. The surface must be carefully clean, dry, well consolidated, without oils, greases, debris, detaching parts or any other material that might compromise the product adhesion. When the surface is friable, scarify totally until the obtainment a good support, correct lesions or deteriorated areas with proper mortar.
| Technical Data |
| Features |
|
Unit |
| Yield |
2.0 kg/m2 (0.41 lb/ft2) in 2 coats if used as waterproofing.
1.0 kg/m2 (0.21 lb/ft2) in 2 coats if used for asbestos encapsulation. |
kg/m² - lb/ft² |
| Aspect |
semi - dense |
- |
| Colour |
white and grey |
- |
| Minimum thickness |
1.5
0.059 |
mm
in |
Waiting time between 1st and 2nd coat
(T=+23°C/+73.4°F; R.H. 50%) |
4 |
hours |
| Application temperature |
+1 / +35
+33.8/ +95 |
°C
°F |
| Drying time (T= +23°C/+73.4°F; R.H. 50%) |
4 |
hours |
| Storage |
12 |
months |
| Packaging |
20 kg (44.09 lb) plastic bucket |
kg |
